//

Procurement compliance in shipping: from supplier to payment

How ship managers choose suppliers, vet and screen them, check invoices and release payments, with a checklist for every stage.

Procurement compliance in shipping is the set of controls that make sure you buy only from suppliers that meet your standards, on terms your purchasing rules allow. It also makes sure you pay the right company into the right bank account. It runs from the first requisition to the final payment, and each step leaves evidence an auditor can follow.

What is procurement compliance in shipping?

Procurement compliance in shipping means every purchase for a vessel follows your purchasing rules and the law, from the supplier you choose to the account you pay. For a ship manager it covers five stages: who you buy from, how suppliers are vetted, how they are screened, how invoices are checked and how payments are released.

Together these stages make up the procure-to-pay process: the span from a vessel raising a requisition to the supplier being paid for it. The rules that apply along the way come from three places. Your own purchasing policy. Your clients’ expectations, because a ship manager often buys with the owner’s money. And sanctions law, which applies whether or not anyone checks.

The difficulty is that the stages sit with different people. Procurement chooses the supplier and raises the purchase order (PO), the formal order sent to the supplier. The vessel confirms what arrived. Finance approves the invoice and releases the money. Each team checks its own step. Often, nobody sees the supplier end to end.

That is how a supplier file goes out of date. Take a supplier that passes vetting in March. In June, its new owner is added to a sanctions list. In September, its invoice arrives, matches the order and is approved. Nobody re-checked. The vetting file still says low risk.

How is procurement compliance different from marine vendor management?

Vendor management is the whole relationship with a supplier: selecting it, agreeing contracts, tracking performance and deciding whether to renew. Procurement compliance is the set of checks inside that relationship that prove each purchase followed the rules. Vendor management asks whether a supplier is good for you. Procurement compliance asks whether you can show that every order, invoice and payment was allowed.

It also sits beside the regulatory paperwork a ship needs, rather than replacing it. Keeping a vessel’s Inventory of Hazardous Materials (IHM) current, for example, means collecting supplier declarations on the orders that need them; our guide to IHM compliance covers that topic.

How do approved and preferred suppliers work in shipping?

You should buy from suppliers on your approved list, and steer spend towards the preferred suppliers within it. An approved supplier has passed your checks and may receive orders. A preferred supplier is an approved supplier you have chosen to favour, usually for agreed prices, reliable delivery or coverage in the ports your vessels call at.

The list only works if it holds on every order. That means purchasing rules applied to each requisition, the request a vessel or office raises for goods or services. Four rules do most of the work:

  • Approved suppliers. Orders go only to suppliers that have cleared your checks.

  • Spend limits. Each buyer, vessel or office can commit up to a set amount before a higher approval is needed.

  • Category policies. Some categories, such as chemicals or lifesaving equipment, need specific suppliers, documents or extra checks.

  • Approvals. The right person signs off before the PO goes out, and the approval is recorded.

Rules applied after the order is placed are a report, not a control. A month-end review tells you what went wrong. A check at the requisition can stop it.

Preferred suppliers should not be the only option. A vessel in an unfamiliar port may need a supplier you have not used, and a better price may sit outside the list. In good marine procurement, preferred suppliers show first, while alternatives worth considering stay visible. Any new supplier then goes through vetting before it receives an order.

How do ship managers vet marine suppliers?

Ship managers typically vet marine suppliers by checking five areas before the first order: quality, financial standing, operational capability, ESG (environmental, social and governance) record and compliance documents. They score the results against their own criteria, keep the evidence, and revalidate it when documents expire. Vetting answers whether a supplier is fit to work with. Sanctions screening and KYB (Know Your Business) identity checks are a separate step: they answer whether you are allowed to pay it.

What to check

  • Quality. Certificates such as ISO 9001 for quality management, plus product approvals where a category needs them.

  • Financial standing. Recent accounts, credit reports and any sign of insolvency. A supplier that fails mid-contract leaves a vessel waiting for stores or spares.

  • Operational capability. The ports the supplier serves, its delivery record, its lead times and whether it can meet a vessel at short notice.

  • ESG. An environmental management system (often ISO 14001), labour and health and safety standards (often ISO 45001), and anti-bribery and corruption controls.

  • Compliance documents. Company registration, insurance certificates and any licences the category needs, each with a document number and a validity date.

How to run it

  1. Set criteria by category. A ship chandler, the supplier of provisions and stores to vessels, does not need the same checks as a supplier of lifesaving equipment.

  2. Send one standard questionnaire. The same questions for every supplier in a category, so answers can be compared.

  3. Collect documents with their dates. Record each certificate’s number and expiry date, not only the file.

  4. Review and score. Weight each area by what matters for the category, and set bands, such as low, medium and high risk, that lead to different decisions.

  5. Decide and record. Approve, approve with conditions or decline, and keep the reason.

  6. Revalidate. Re-check when a certificate expires, and review every supplier on a fixed cycle that your policy sets by risk, with shorter cycles for higher-risk suppliers.

The last step is where most programmes fall short. A vetting file is accurate on the day it is completed and out of date as certificates lapse, ownership changes and finances weaken. Auditors ask for evidence that is current, not evidence that was current last year.

Vetting is also repeated across the industry. A supplier is often asked to fill in a different questionnaire by each buyer it serves. Marcura’s compliance leadership has argued that the same counterparty may be vetted by dozens of organisations, and that what one of them learns rarely travels to the others.

How do you screen suppliers for sanctions and KYB?

You screen a supplier by confirming it is a real, registered business and checking it against the sanctions lists that apply to you. Best practice is to screen a counterparty, meaning any company you buy from or pay, before you onboard it, again before you pay it, and continuously while you trade with it, because the lists change.

KYB, or Know Your Business, is identity verification for companies. It confirms the supplier’s legal name, registration number and registered address against an official company register.

Sanctions lists are the official lists of people, companies and vessels you are restricted from dealing with. Maritime businesses commonly screen against four: the US list kept by the Office of Foreign Assets Control (OFAC), the EU consolidated list, the UK sanctions list and the UN Security Council consolidated list. Which lists bind you depends on where you and your clients are based, the currency you pay in and the banks you use.

Screening a name is a starting point, not a conclusion. Exposure can sit with a supplier’s owners, its bank or the vessels it serves, as an analysis of the EU’s 21st sanctions package sets out. Tools also disagree. Marcura’s 2026 compliance report found that organisations often run several screening platforms that return different results on the same counterparty.

A match is not a verdict either. Many hits are false positives: a common name, a similar spelling. Each one needs a person to resolve it and a record of why it was cleared or escalated.

How do you check an invoice before you approve it?

Before you approve an invoice, check three things. It matches what was ordered and received. It comes from the supplier you ordered from: the same legal entity, not a similar name or a related company. And the bank details on it match the account you verified. The first is matching. The second and third are counterparty checks, and they are the ones fraudsters target.

Accounts payable (AP) is the finance function that approves supplier invoices and pays them. In shipping, invoice checks are hard because procurement, operations and finance each hold a piece of the record, which is why invoice control was left behind when procurement went digital.

In maritime, four-way matching checks the invoice against the PO, the supplier’s delivery note and the vessel’s own confirmation of what arrived. Standard three-way matching uses only the first three documents. SpecTec’s 2026 research across operators managing 3,150 vessels found three-way matching failing between 60 and 70 percent of the time in maritime, a gap explained in our article on matching invoices to what the vessel received.

Bank account change fraud is a common way the counterparty checks fail. An email arrives from what looks like a known supplier, asking you to pay a new account. The invoice matches the order, so the approver has no reason to doubt it. Supplier bank account change fraud works because many workflows verify bank details once, at onboarding, and not when they change.

Take an illustrative case. A spares supplier you have used for three years sends an invoice for $40,000. It matches the PO and the vessel’s receipt. A week earlier, an email from the supplier’s usual contact gave a new bank account. The invoice clears and is paid. A month later, the real supplier asks why it has not been paid. The $40,000 is gone, and the supplier still needs paying.

Four controls reduce the risk:

  • Treat any change of bank details as a separate event, held until verified.

  • Verify by calling a contact you already hold, never one given in the email asking for the change.

  • Check that the new account belongs to the supplier’s legal entity.

  • Check for duplicates: the same invoice sent twice, or one order split to stay under an approval limit.

What should happen before a supplier is paid?

Before a supplier is paid, the payment should be screened again, sent to a verified account, approved by the right person, paid in the supplier’s currency and reconciled to the order it came from. Each of those steps should leave a record.

  1. Screened again. Weeks can pass between onboarding, invoice and payment, and sanctions lists change in that time. The check that matters most is the one closest to the money.

  2. Paid to a verified account. The account belongs to the supplier’s legal entity and matches the details you verified, with no unverified changes.

  3. Approved by the right person. The person who raised the order should not be the person who releases the payment.

  4. Paid in the supplier’s currency. The payment is made in the currency on the invoice.

  5. Reconciled to the order. Each payment ties back to its PO and invoice, and posts to the finance system.

  6. Logged. Who approved, what was checked and when, kept in one place.

An analysis of maritime payment fraud controls notes that most operators screen vendors at onboarding, and that the vulnerability comes afterwards, when bank details change between registration and payment. If you are assessing software for this stage, ask where screening sits. Among the questions to ask a maritime AP vendor, the answer to look for is continuous screening inside payment execution, not a check at setup.

An audit trail is the record of who did what, and when. It is easier to keep while the work happens than to rebuild afterwards from email threads.

A procurement compliance checklist

A procurement compliance checklist for shipping has six stages, from requisition to ongoing review, each with a control to apply and the evidence to keep. Use it for each supplier, from the first order to the last payment.

Procurement compliance in shipping: the control at each stage and the evidence to keep

Stage
Control
Evidence you keep

Requisition

Approved supplier, spend limit, category policy

Approval with name and date

Vetting

Questionnaire, documents, risk score

Certificates with validity dates

Screening

KYB and sanctions lists

Screening result, hits resolved

Invoice

Four-way match, counterparty, bank details

Match result, exceptions log

Payment

Re-screened, verified account, approval

Payment record, reconciliation

Ongoing

Monitoring, expiry reminders, review cycle

Alerts, review dates

How Marcura carries one order from requisition to payment

On Marcura, the order carries from requisition through invoice matching, screening and payment as one record, so the PO, the delivery, the invoice and the payment stay attached to each other.

The order starts in ShipServ by Marcura, where your purchasing rules apply to each requisition, from approved suppliers and spend limits to category policies and the right approvals, before an order is placed. Preferred suppliers surface first, with better-priced or better-performing alternatives highlighted. Buyers who want vetting done for them can add ShipServ’s Supplier Vetting service. ShipServ sends suppliers a questionnaire covering compliance, financials, operations and ESG, reviews their documents, gives each supplier a weighted risk score and alerts you when a certificate is about to expire.

Invoices are matched by AP automation to the order, the delivery note and the vessel’s confirmation of what arrived. Lines that agree clear on their own, and only the exceptions come to a person. When you pay suppliers through Marcura, KYB and sanctions screening run automatically. The supplier’s business and bank details are verified, and the supplier is screened against US, EU, UK and UN sanctions lists before money moves. It is then continuously monitored.

Approved invoices are paid through vendor payments in one run, each supplier in its own currency, and each payment is reconciled to its order and posted to your finance system. Each check and approval is logged with a timestamp, so the audit trail builds as the work happens.

Screening is a control inside your workflow. It supports your compliance programme; it does not replace your own obligations or guarantee an outcome. Together, these steps form the procure-to-pay capability introduced in the September 2026 launch announcement.

Where should you start with procurement compliance?

If you are building procurement compliance from scratch, start with the two controls closest to the money: verified bank details and screening at payment. Then work back to vetting and purchasing rules. Each stage you connect removes a handover where a check can be skipped.

FAQs

Carry every order from requisition to payment

Carry every order from requisition to payment

Purchasing rules, invoice matching and screened payments in one flow, with the audit trail built as the work happens.

Explore procure-to-pay

Keep reading

IHM compliance: what Part I needs and how to keep it current

Keeping IHM Part I current depends on what you buy, and when. What the Hong Kong Convention and the EU SRR require of Part I, which purchases need an MD and SDoC, and how to build IHM upkeep into procurement.

Project cargo stevedoring costs: what a changed discharge sequence adds

How a project cargo voyage loses money in the gaps between estimate, invoice and claim, and where to catch it.

Before You fix: what towage fuel surcharges are telling us

Houston towage fuel surcharges are 3. 4 times last year’s level. Learn what to check before you fix.

IHM compliance: what Part I needs and how to keep it current

Keeping IHM Part I current depends on what you buy, and when. What the Hong Kong Convention and the EU SRR require of Part I, which purchases need an MD and SDoC, and how to build IHM upkeep into procurement.

Project cargo stevedoring costs: what a changed discharge sequence adds

How a project cargo voyage loses money in the gaps between estimate, invoice and claim, and where to catch it.